Mini Joystick J1 - J1A6AA0AK1
Product information
Due to its very compact design, the Mini Joystick J1 is ideally suited for use in small control panels and remote control consoles. The areas of application range from remote crane control, microscopy and robot control to medical technology.
Features
-
Space-saving design
-
High reliability and service life through contactless Hall or reed technology
-
Integrated third axis or push-button in the handle enables the operation of additional functions and reduces the number of further operating elements
-
Ratiometic output signal 0.5...4.5 VDC
-
Optional redundant/semi-redundant output signal for safety-critical applications
-
High protection class IP67 for harsh conditions
-
With optional Z-axis and variable installation
Technical Data
|
J1A6AA0AK1
€255.39
|
||
|
Electrical data
|
||
| Current consumption: | pro Signal max. 10 mA | |
|---|---|---|
| EMC emission (Norm): | DIN EN 13309, DIN EN ISO 14982 | |
| EMC immunity (Norm): | DIN EN 13309, DIN EN ISO 14982 | |
| Load resistance min.: | 20000 Ohm | |
| Operating voltage max.: | 5.5 V DC | |
| Operating voltage min.: | 4.5 V DC | |
| Output signal: | analogue | |
| Output signal - centre position/zero position: | 2.5 V DC | |
| Output signal max.: | 4.5 V DC | |
| Output signal min.: | 0.5 V DC | |
| Outputs (quantity, type): | 2 | |
| Polarity reversal protection: | ||
| Short-circuit resistance to GND: | ||
| Short-circuit resistance to supply: | ||
| Technology: | Hall | |
|
Mechanical data
|
||
| Actuation type: | multi axis | |
| Deflection: | ± 15 ° | |
| Service life, mechanical (Cycles): | 1500000 | |
|
Material information
|
||
| Gaiter material: | EPDM | |
| Housing material: | PA12 GF30 | |
| Shaft material: | Peek | |
|
Environmental conditions
|
||
| Protection class, electronic: | IP67 DIN EN 60529 | |
|
Installation
|
||
| Installation: | from below | |
| Mounting type: | screwed from above | |
| Torque for fastening screws: | 0,3 N m | |
|
Connection
|
||
| Cable length: | 0.3 m | |
| Cable type: | Lify-t | |
| Connector type: | Micro-Fit 3.0 43025-1600 16Pin |
J1A6AA0AK1
€255.39
Electrical data
Current consumption:
pro Signal max. 10 mA
EMC emission (Norm):
DIN EN 13309, DIN EN ISO 14982
EMC immunity (Norm):
DIN EN 13309, DIN EN ISO 14982
Load resistance min.:
20000 Ohm
Operating voltage max.:
5.5 V DC
Operating voltage min.:
4.5 V DC
Output signal:
analogue
Output signal - centre position/zero position:
2.5 V DC
Output signal max.:
4.5 V DC
Output signal min.:
0.5 V DC
Outputs (quantity, type):
2
Polarity reversal protection:
Short-circuit resistance to GND:
Short-circuit resistance to supply:
Technology:
Hall
Mechanical data
Actuation type:
multi axis
Deflection:
± 15 °
Service life, mechanical (Cycles):
1500000
Material information
Gaiter material:
EPDM
Housing material:
PA12 GF30
Shaft material:
Peek
Environmental conditions
Protection class, electronic:
IP67 DIN EN 60529
Installation
Installation:
from below
Mounting type:
screwed from above
Torque for fastening screws:
0,3 N m
Connection
Cable length:
0.3 m
Cable type:
Lify-t
Connector type:
Micro-Fit 3.0 43025-1600 16Pin